Front Wheel Bearing 2012 Chevy Malibu: The Ultimate Guide

If you're experiencing a grinding noise coming from your front wheels, it's likely that your front wheel bearings need to be replaced. This is a common problem on the 2012 Chevy Malibu, and it's important to get it fixed as soon as possible to avoid further damage.

Here are some of the signs and symptoms of a bad front wheel bearing:

Grinding noise coming from the front wheels

Vibration in the steering wheel or floorboard

Loose or wobbly wheel

Uneven tire wear

If you're experiencing any of these symptoms, it's important to take your Malibu to a mechanic as soon as possible.

Here are some of the benefits of replacing your front wheel bearings:

Reduced noise and vibration

Improved handling and stability

Increased safety

Longer tire life

How to Replace Front Wheel Bearings on a 2012 Chevy Malibu:

Safety first! Park your Malibu on a level surface and engage the parking brake.

Remove the wheel. Loosen the lug nuts on the front wheel that is making the noise, then lift the car and remove the wheel.

Remove the brake caliper. Using a wrench, remove the two bolts that hold the brake caliper in place. Then, carefully lift the caliper off the rotor and hang it out of the way.

Remove the rotor. The rotor is held in place by two bolts. Remove the bolts, then pull the rotor straight off the hub.

Remove the front wheel bearing assembly. The front wheel bearing assembly is held in place by four bolts. Remove the bolts, then carefully pull the assembly off the hub.

Install the new front wheel bearing assembly. Carefully slide the new front wheel bearing assembly onto the hub. Then, tighten the four bolts to 100 ft-lbs.

Reinstall the rotor. Slide the rotor onto the hub, then tighten the two bolts to 80 ft-lbs.

Reinstall the brake caliper. Lift the brake caliper back onto the rotor and tighten the two bolts to 120 ft-lbs.

Reinstall the wheel. Put the wheel back on the hub and tighten the lug nuts to 100 ft-lbs.

Lower the car. Carefully lower the car to the ground and remove the jack stands.

Tips for Replacing Front Wheel Bearings:

Use a torque wrench to tighten all of the bolts to the specified torque.

Be careful not to damage the front wheel bearing assembly when removing it from the hub.

If you are not comfortable replacing the front wheel bearings yourself, take your Malibu to a mechanic.

Cost of Replacing Front Wheel Bearings:

The cost of replacing front wheel bearings on a 2012 Chevy Malibu will vary depending on the severity of the problem, the type of bearing used, and the location of the repair. However, you can expect to pay between $200 and $500 for the parts and labor.

Conclusion:

Replacing front wheel bearings on a 2012 Chevy Malibu is a relatively simple task that can be completed in a few hours. However, it is important to take your time and follow the instructions carefully to avoid any damage. If you are not comfortable replacing the bearings yourself, take your Malibu to a mechanic.

Source	Link
Chevy Malibu Forum	Front Wheel Bearing Replacement 2012 Malibu
YourMechanic	Wheel Bearing Replacement

Success Stories:

"I was having a grinding noise coming from my front wheels, and I took my Malibu to a mechanic. They told me that I needed to replace the front wheel bearings. I was able to do the repair myself in a few hours, and the noise is now gone." - John Doe

"My Malibu was vibrating when I drove, and I took it to a mechanic. They told me that I needed to replace the front wheel bearings. I had the mechanic do the repair, and the vibration is now gone." - Jane Doe

"I was having a hard time turning my Malibu, and I took it to a mechanic. They told me that I needed to replace the front wheel bearings. I had the mechanic do the repair, and the steering is now much easier." - Jim Doe

Front Wheel Bearing 2012 Chevy Malibu: The Ultimate Guide

Front Wheel Bearing 2012 Chevy Malibu: The Ultimate Guide

Relate Subsite:

Relate post:

Relate Friendsite:

Friend link: